P044B
EGR Sensor C Circuit Range/Performance
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. What EGR sensor C is depends on the maker: on Ford petrol engines from 2020 it is the DPFE sensor, which measures the pressure drop across an orifice in the EGR pipe (sensor A there is the valve position sensor); GM diesels assign it to the position sensor of a low-pressure EGR valve, but only within fault groups. P044B means its signal is electrically valid but implausible – for example a pressure difference with the valve closed, or no reaction when it opens. No manufacturer document available to us uses this code; Ford checks the DPFE plausibility under its own codes P139A–P139C (hoses swapped, front or rear hose off or blocked). EGR flow diagnosis is then suspended.
Possible causes
- Pressure hoses off, swapped or blocked (soot, condensate) high
- Sensor zero point drifted medium
- Orifice or EGR pipe coked medium
- Contact resistance in the connector low
Symptoms
- Check engine light on
- Usually no change in driving
- EGR readiness not set, EGR possibly switched off
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P044B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.