P044A
EGR Sensor C Circuit
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. What EGR sensor C is depends on the maker: on Ford petrol engines from 2020 it is the DPFE sensor, which measures the pressure drop across an orifice in the EGR pipe (sensor A there is the valve position sensor); GM diesels assign it to the position sensor of a low-pressure EGR valve, but only within fault groups. P044A is the general circuit fault of this sensor. No manufacturer document available to us uses it – Ford splits it into P044C/P044D – so the description follows CARB's requirement to check input circuits for continuity and range. Without the sensor, EGR flow and cooler checks are suspended.
Possible causes
- Connector or wire to sensor C open or corroded high
- Sensor faulty medium
- 5 V reference or ground disturbed (with other sensor codes) medium
- Engine module low
Symptoms
- Check engine light on
- Usually no change in driving
- EGR readiness not set, EGR possibly switched off
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P044A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.