P0445
EVAP System Purge Control Valve A Circuit Shorted
The evaporative emission (EVAP) system stores fuel vapour from the tank in a charcoal canister; a purge valve lets the engine draw it off, and a vent valve opens the canister to fresh air. P0445 is the short-circuit code of the older scheme for purge valve A, used by Saab's Trionic T7 and VW; GM reports shorts as P0458/P0459, Ford covers them in P0443. Saab checks with the low-side output switched on: the voltage should then be near 0 V, and above 2 V means the line is shorted to positive or the coil is shorted, with the driver in current limiting. The code sets after about 1 s; the driver protects itself by switching off, so purging stops.
Possible causes
- Purge valve coil shorted (shorted turns) high
- Control wire shorted to positive (chafed) medium
- Moisture or corrosion in the connector medium
- Driver in the engine module low
Symptoms
- Check engine light on
- Possibly fuel smell
- EVAP monitors do not run
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0445
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.