P0441
EVAP System Incorrect Purge Flow
The evaporative emission (EVAP) system stores fuel vapour from the tank in a charcoal canister; a purge valve lets the engine draw it off, and a vent valve opens the canister to fresh air. P0441 means the actual purge flow does not match the target – too little, or flow although the purge valve is closed. CARB requires a fault when no purge flow is detected. Strategies differ widely: Saab's Trionic T7/T8 sets it for flow with the valve closed (tank pressure falling faster than 27.5–40 Pa/s), VW and Audi check purge flow with the leak detection pump, Honda/Acura for a sticking purge valve. GM and Ford do not use P0441 – they report flow with the valve closed as P0496 or P1450 and missing flow as P0455.
Possible causes
- Purge valve stuck open or not sealing high
- Purge valve stuck closed, purge line blocked, kinked or off medium
- Leak detection pump with tolerance fault (VW) medium
- Canister saturated or damaged, turbo purge check valve faulty low
Symptoms
- Check engine light on
- Rough idle or hard start after refuelling (valve stuck open)
- Fuel smell
- Possibly fuel trim codes
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0441
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-5-9600/2002/2-engine/trionic-t7-v6/fault-diagnosis-diagnostic-trouble-codes/p0441
- saabwisonline.com/9-3-9440/2006/dtcs/t8/p0441-00
- static.nhtsa.gov/odi/tsbs/2012/MC-10241275-9999.pdf
- static.nhtsa.gov/odi/tsbs/2023/MC-10247626-0001.pdf
- law.cornell.edu/regulations/california/13-CCR-1968.2