P0436
Catalyst Temperature Sensor Circuit Range/Performance Bank 2 Sensor 1
Some engines – mainly diesels – measure the temperature at or in the catalyst with a thermistor in a voltage divider instead of only modelling it; most makers report exhaust temperature sensors under P0544 ff, P2031 ff or P2080 ff instead. Sensor 1 of bank 2 is the first catalyst temperature sensor on the side without cylinder 1. P0436 means the signal is electrically valid but implausible – compared with the temperature model or neighbouring exhaust sensors it is off, sluggish or frozen. No manufacturer document available to us uses this code; the description follows CARB, which requires input circuits to be checked for circuit faults and plausibility, and the comparable exhaust temperature sensors.
Possible causes
- Soot on the sensor tip (diesel) high
- Sensor aged, characteristic drifted medium
- Contact resistance in connector or wiring medium
- Engine module software (plausibility limits) medium
- Exhaust leak upstream of the sensor low
Symptoms
- Check engine light on
- Usually no noticeable change (substitute value from the model)
- Diesel: filter regeneration distorted or blocked, possibly further codes such as P2459 or P0420
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0436
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.