OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0426

Catalyst Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1

Some engines – mainly diesels – measure the temperature at or in the catalyst with a thermistor in a voltage divider instead of only modelling it; most makers report exhaust temperature sensors under P0544 ff, P2031 ff or P2080 ff instead. Sensor 1 of bank 1 is the first catalyst temperature sensor on the side with cylinder 1. P0426 means the signal is electrically valid but implausible – compared with the temperature model or neighbouring exhaust sensors it is off, sluggish or frozen. Only FCA's 3.0-litre EcoDiesel (Ram 1500 and Jeep Grand Cherokee, 2014/15) is documented with this sensor: it sits in the middle of the oxidation catalyst and particulate filter unit, a platinum element with 200–240 Ω at room temperature; the bulletin for P0426 advises blowing soot off the tip, measuring and replacing it, plus a software update.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 26

Possible causes

  • Soot on the sensor tip (diesel) high
  • Sensor aged, characteristic drifted medium
  • Contact resistance in connector or wiring medium
  • Engine module software (plausibility limits) medium
  • Exhaust leak upstream of the sensor low

Symptoms

  • Check engine light on
  • Usually no noticeable change (substitute value from the model)
  • Diesel: filter regeneration distorted or blocked, possibly further codes such as P2459 or P0420

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0426

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication