P041F
AIR System Switching Valve A Circuit Low
After a cold start the secondary air pump blows fresh air into the exhaust; switching valve A is the electrically driven valve that opens this path. GM checks the valve circuit in three codes – P0412 open, P041F shorted to ground, P044F shorted to positive – while other makers use P0413/P0414 or P0412 for everything. P041F means the control circuit is shorted to ground: GM checks with the driver switched off and sets the code at 0.5 Ω or less to ground (20 of 25 samples of 250 ms, above 11 V, MIL after two trips). The valve is then energised and open although not commanded; P0411 or P2440 may follow.
Possible causes
- Control wire chafed against ground high
- Water or corrosion in the valve connector medium
- Valve coil shorted to its housing medium
- Driver in the engine module low
Symptoms
- Check engine light on (after two trips)
- No change in driving
- Secondary air readiness not set, possibly P0411
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P041F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.