P041C
EGR Temperature Sensor B Circuit Low
EGR temperature sensor B measures the gas temperature in the EGR path – for cooler monitoring, component protection and the EGR model. Whether it sits before or after the cooler depends on the maker: GM diesels have sensor A after and B before the cooler, Ford diesels sensor B after it. Like a coolant sensor it is an NTC, so a low voltage means hot. P041C means the signal is below its lower limit – very hot or shorted to ground; Ford puts below 0.10 V at about 961 °C. Thresholds: Ford diesel below 0.10 V for 3 s, Ford petrol below 0.32 V for 5 s, GM's Duramax LML below 0.46 V for 5 s, GM 2018 a resistance below 164 Ω; MIL after two trips. A substitute value is used and the EGR cooler check (P2457) is suspended.
Possible causes
- Signal wire shorted to ground high
- Sensor shorted internally medium
- Moisture in the connector medium
- Actual overtemperature (cooler or coolant problem) low
Symptoms
- Check engine light on
- Usually no change in driving
- Substitute value used, EGR cooler check suspended
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P041C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2014/14OBDG10 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG04 Engine Diagnostics.pdf