P0419
AIR System Control B Circuit
After a cold start the secondary air (AIR) pump blows fresh air behind the exhaust valves so that unburnt fuel burns off and the catalyst heats up faster; a shut-off valve opens the path and stops exhaust from flowing back. Control B is the drive circuit of a second pump or pump relay, found only on systems with two pumps or relays, for example large V engines with one pump per bank. It is checked like P0418 by comparing the driver's feedback with its commanded state. No manufacturer document available to us describes P0419 specifically; Pierburg's fault table lists it as relay B with the same remedies as relay A.
Possible causes
- Pump relay B faulty high
- Wire or connector to relay B faulty high
- Fuse or supply medium
- Pump B blocked (consequential damage) low
- Engine module low
Symptoms
- Check engine light on
- Second pump does not run
- Secondary air readiness not set (emission test)
- Driving normal
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0419
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.