P0415
AIR System Switching Valve B Circuit
The switching valve is the electrically driven valve of this path – a solenoid valve, or on Pierburg/VW systems an electric changeover valve that applies vacuum to the pneumatic combination valve; valve A serves the first path or bank 1, valve B the second. P0415 is the general electrical fault in the control circuit of valve B, the second valve on two-valve or two-bank systems such as V engines or Subaru's turbo boxer. It is detected like P0412 for valve A, by comparing the driver's feedback with its commanded state. No manufacturer document available to us describes P0415 specifically; Pierburg's fault table lists it with the same remedies as valve A.
Possible causes
- Switching valve B faulty high
- Wire or connector to valve B faulty high
- Valve supply or fuse medium
- Engine module low
Symptoms
- Check engine light on
- Secondary air inactive on the second bank
- Secondary air readiness not set (emission test)
- Driving normal
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0415
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.