OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P040D

EGR Temperature Sensor A Circuit High

EGR temperature sensor A measures the gas temperature in the EGR path – for cooler monitoring, component protection and the EGR model. Whether it sits before or after the cooler depends on the maker: GM diesels have sensor A after and B before the cooler, Ford diesels sensor B after it. Like a coolant sensor it is an NTC, so a low voltage means hot. P040D means the signal is above its upper limit – very cold or, far more often, an open circuit (connector off, broken wire). Thresholds: GM's Duramax LML above 4.84 V for 5 s, GM 2014 above 4.98 V, GM 2018 a resistance above 1268 Ω (40 of 50 samples, MIL after two trips); Ford diesel lists the code without figures. A substitute value is used.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 0D

Possible causes

  • Connector off, broken wire or open circuit high
  • Sensor open internally medium
  • Ground wire open or short to positive medium
  • Engine module input low

Symptoms

  • Check engine light on
  • Usually no change in driving
  • Substitute value used, EGR cooler check suspended

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P040D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication