OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P040B

EGR Temperature Sensor A Circuit Range/Performance

EGR temperature sensor A measures the gas temperature in the EGR path – for cooler monitoring, component protection and the EGR model. Whether it sits before or after the cooler depends on the maker: GM diesels have sensor A after and B before the cooler, Ford diesels sensor B after it. Like a coolant sensor it is an NTC, so a low voltage means hot. P040B is its plausibility check: after a cold start the sensor must warm up once hot exhaust flows. Ford diesels set the code if it rises by less than 10 °C after load; GM diesels if it barely changes after at least 8 hours off and a defined EGR flow (MIL after two trips). A sooted sensor tip or a lack of EGR flow are typical causes.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number4 / 0B

Possible causes

  • Sensor sluggish, tip sooted high
  • Sensor drifting or faulty medium
  • No EGR flow (valve or cooler blocked), sensor sees no heat medium
  • Contact resistance in the connector low

Symptoms

  • Check engine light on
  • Usually no change in driving
  • Substitute value used, EGR cooler check suspended

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P040B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication