P0409
EGR Sensor A Circuit
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR sensor A is usually the valve position sensor (on older Fords the DPFE pressure sensor). P0409 is its general circuit code, for a missing or implausible signal that the module does not classify as low or high. No manufacturer document available to us uses it – GM, Ford and Saab report sensor A as P0405/P0406, Ford intermittent faults as P046D – so the description follows CARB, which requires input circuits to be checked for continuity and range. EGR is usually switched off.
Possible causes
- Connector or wire of the position sensor open or loose high
- EGR valve with integrated sensor faulty medium
- 5 V reference or ground disturbed low
- Engine module low
Symptoms
- Check engine light on
- EGR switched off
- Otherwise usually unremarkable
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0409
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.