P0407
EGR Sensor B Circuit Low
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. What EGR sensor B is depends on the manufacturer – on systems with a second valve or pressure sensor it is that second sensor. GM's diesels of 2017/18 use P0407 for the coolant temperature sensor at the inlet of the high-pressure EGR cooler: low means a resistance below 55 Ω, i.e. very hot or shorted to ground, MIL after two trips. No manufacturer document available to us uses the code for a second position sensor. A substitute value is used.
Possible causes
- Sensor wire shorted to ground high
- Sensor faulty medium
- Connector corroded (near coolant or exhaust) medium
- Engine module input low
Symptoms
- Check engine light on
- Usually no change in driving
- EGR or EGR cooler protection possibly restricted
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0407
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.