OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P03D8

Cylinder 7 Pressure Variation Low

Some diesels have a combustion pressure sensor in the glow plug; the engine module uses it to control injection for each cylinder. This code concerns cylinder 7. P03D8 means the swing of the pressure signal is too small. The only manufacturer we found using this code family, GM's European 2.0 CDTI four-cylinder diesel (Saab 9-5, 2010), uses 'pressure variation too low' for cylinders 1 to 4: signal outside its range for more than 0.2 s with the engine running; what exactly is measured, Saab does not explain – presumably the signal barely responds, for example because a coked glow rod no longer transmits the pressure. For cylinder 7, which only engines with at least 7 cylinders have, no manufacturer document available to us uses the code; the description follows that logic and CARB. Usually there are no noticeable symptoms.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / D8

Possible causes

  • Pressure-sensing glow plug faulty or coked (glow rod stuck) high
  • Contact resistance in connector or ground medium
  • Actual compression loss or misfire in the cylinder low

Symptoms

  • Check engine light on
  • Usually no noticeable symptoms
  • Possibly rough running or combustion noise because control is off

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P03D8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication