P03CF
Cylinder 6 Pressure Variation High
Some diesels have a combustion pressure sensor in the glow plug; the engine module uses it to control injection for each cylinder. This code concerns cylinder 6. P03CF means the swing of the pressure signal is too large. The only manufacturer we found using this code family, GM's European 2.0 CDTI four-cylinder diesel (Saab 9-5, 2010), uses 'pressure variation too high' for cylinders 1 to 4: signal outside its range for more than 0.2 s with the engine running; what exactly is measured, Saab does not explain – presumably a noisy or overshooting signal, from faulty sensor electronics, interference or a combustion anomaly. For cylinder 6, which only engines with at least 6 cylinders have, no manufacturer document available to us uses the code; the description follows that logic and CARB. Usually there are no noticeable symptoms.
Possible causes
- Sensor in the glow plug faulty (signal noise) high
- Loose contact or interference on the signal wire medium
- Combustion anomaly (dripping injector, harsh combustion) low
Symptoms
- Check engine light on
- Usually no noticeable symptoms
- Possibly rough running or combustion noise because control is off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P03CF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.