OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P03C6

Cylinder 5 Combustion Performance

Some diesels have a combustion pressure sensor in the glow plug; the engine module uses it to control injection for each cylinder. This code concerns cylinder 5. P03C6 means the combustion quality in the cylinder, evaluated from the combustion pressure, is abnormal. No manufacturer document available to us describes the code; a GM patent shows the method: the ratio of measured to motoring pressure is turned into a measure of combustion energy, an inequality index against the neighbouring cylinders in firing order is formed, and a two-sided threshold detects partial combustion, misfire, injector and compression faults. CARB requires engines with a combustion or combustion quality sensor to detect misfire more sharply (5 % in 1,000 revolutions). Typical causes are a coked or leaking injector, compression loss or poor fuel; the engine runs roughly and smokes more.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / C6

Possible causes

  • Injector coked, leaking or delivering the wrong quantity high
  • Compression loss (valve, rings) medium
  • Partial combustion or misfire (fuel quality, EGR distribution) medium
  • Pressure sensor drifting low

Symptoms

  • Check engine light on
  • Rough running, vibration
  • Loss of power, more smoke and consumption

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P03C6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication