OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P03BB

Cylinder 4 Pressure Variation High

Some diesels have a combustion pressure sensor in the glow plug; the engine module uses it to control injection for each cylinder. This code concerns cylinder 4. GM's European 2.0 CDTI diesel (Saab 9-5, 2010) uses P03BB as 'pressure variation too high' and sets it when the signal is outside its range for more than 0.2 s with the engine running; its fault table counts it among the signal performance faults together with the erratic code. What exactly is measured, Saab does not explain; presumably it is the swing of the pressure signal within an engine cycle – too large a swing points to a noisy or overshooting signal or implausible pressure peaks, for example from faulty sensor electronics, interference on the signal wire or, less often, a combustion anomaly such as a dripping injector. Usually there are no noticeable symptoms.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / BB

Possible causes

  • Sensor in the glow plug faulty (signal noise) high
  • Loose contact or interference on the signal wire medium
  • Combustion anomaly (dripping injector, harsh combustion) low

Symptoms

  • Check engine light on
  • Usually no noticeable symptoms
  • Possibly rough running or combustion noise because control is off

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P03BB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication