P03B8
Cylinder 4 Pressure Too Low
Some diesels have a combustion pressure sensor in the glow plug; the engine module uses it to control injection for each cylinder. This code concerns cylinder 4. P03B8 means the pressure measured in the cylinder is lower than expected while the sensor itself is electrically fine. No manufacturer document available to us describes the code; GM patents show how such an evaluation works: peak and minimum pressure are compared with limits and with a motoring pressure calculated from manifold pressure and compression ratio, and the ratio of measured to motoring pressure is compared between cylinders. A low value can mean weak combustion or compression – leaking valve, worn rings, leaking glow plug seat, an injector delivering too little – or a sensor drifting downwards. The usual consequence is rough running and more smoke.
Possible causes
- Compression loss (valve, piston rings, leaking glow plug seat) medium
- Injector delivering too little or coked medium
- Sensor drifting downwards (deposits) medium
- Misfire or partial combustion low
Symptoms
- Check engine light on
- Lack of power, rough running, possibly misfire on this cylinder
- More smoke
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P03B8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.