OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0399

Cylinder 1 Pressure Sensor Circuit Intermittent/Erratic

Some diesels have a combustion pressure sensor in the glow plug; the engine module uses it to control injection for each cylinder. This code concerns cylinder 1. P0399 means the sensor signal is erratic or drops out for moments. GM's European 2.0 CDTI diesel (Saab 9-5, 2010) calls it 'circuit erratic' and sets it when the signal is outside its range for more than 0.2 s with the engine running; its fault table groups the erratic and pressure variation codes together as signal performance faults. The test plan checks a reference of 4.8–5.2 V and a ground below 5 Ω before the glow plug is replaced. Typical causes are a loose contact at the glow plug connector, a chafed engine harness or sensor electronics that become unstable with temperature. The code often comes and goes; combustion control for the cylinder is suspended while it is active.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / 99

Possible causes

  • Loose contact at the glow plug connector high
  • Chafing or broken wire in the engine harness medium
  • Sensor electronics of the glow plug unstable with temperature medium
  • Interference from ground problems low

Symptoms

  • Check engine light on
  • Occasionally rough running
  • Often no symptoms, the code comes and goes

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0399

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication