P0387
Crankshaft Position Sensor B Circuit Low
By its J2012 name P0387 means the signal of the second crankshaft sensor stays at a low level – typically a short to ground of the signal wire, a missing or shorted sensor supply, or with an inductive sensor an amplitude that is too small. No manufacturer document available to us uses P0387: the engines with a sensor B that we found (GM Northstar 4.6 and 3.8-litre V6, the Honda 3.5-litre in the Saturn Vue Redline) report its electrical faults under P0385 and implausible signals under P0386. The description therefore follows the J2012 name, the function of sensor B and CARB's monitoring requirement for crank angle sensors. As long as sensor A works, the engine usually keeps running; together with a sensor A fault it may not start.
Possible causes
- Signal wire shorted to ground high
- Sensor faulty medium
- Sensor supply too low or shorted medium
- Engine module low
Symptoms
- Check engine light on
- Longer cranking
- Rough running, no start if sensor A also fails
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0387
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.