OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0386

Crankshaft Position Sensor B Circuit Range/Performance

P0386 means the signal of the second crankshaft sensor or second tone wheel track is present but implausible. GM's 2004 Northstar 4.6 V8 sets it after 5 resynchronisations within 10 s, after two trips. GM's 3.8-litre V6 (2006) expects exactly 0 or 6 low resolution pulses per 36 medium resolution pulses and one cam pulse; any other count in 40 of 50 samples sets the code, also after two trips. The Honda 3.5-litre in the 2004 Saturn Vue Redline counts implausible signals of its second crank sensor (target 44 crank pulses per 3 cam pulses, checked every half revolution, the counter dropping by one every 10 s) and sets the code at 30, about 2.2 s at idle, in the first trip. Typical causes are interference pulses, a dirty sensor or a wrong air gap; the result is jerking, misfire or longer cranking.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / 86

Possible causes

  • Interference pulses (wiring near the ignition, shielding) high
  • Sensor dirty or air gap wrong medium
  • Tone wheel damaged medium
  • Sensor faulty medium

Symptoms

  • Check engine light on
  • Jerking, misfire
  • Longer cranking

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0386

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication