P0385
Crankshaft Position Sensor B Circuit
Some engines have a second crankshaft sensor or a second track on the tone wheel, which the engine module checks against sensor A or the camshaft. P0385 means its signal is missing or does not match. GM's 2004 Northstar 4.6 V8 counts the crank pulses per cam pulse (target 48 ± 1, fault in 8 of 10 tests) and also flags 2 s while cranking or 0.4 s running without a match, after two trips; an active P0385 suspends the cam sensor check. GM's 3.8-litre V6 (2006) sets it when its low resolution track stays silent while the medium resolution track delivers 36 pulses, 40 of 50 samples. The Honda 3.5-litre in the 2004 Saturn Vue Redline sets it when the second crank signal is missing while the first runs, judged after 17 revolutions, in the first trip. The engine usually keeps running on sensor A.
Possible causes
- Crankshaft position sensor B faulty high
- Connector or wiring open or corroded high
- Tone wheel or second track damaged low
- Engine module low
Symptoms
- Check engine light on
- Longer cranking
- Tachometer flickers, rough running
- Rarely stalling
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0385
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.