P037F
Glow Plug Sense Circuit High
P037F means the voltage read back from the glow plug supply is too high. GM's 2016/2018 diesels set it when the feedback lies above a threshold derived from the run/crank relay voltage, with a feedback above 5.0 V – for example voltage is reported although the plugs are not energised, or the sense line is shorted to positive. The code needs 40 of 80 samples at 50 ms, about 2 of 4 s, only with the engine running, and turns on the check engine light after two trips; GM classes the cause as internal to the module. If there is a real short to positive or a stuck relay or output stage, the plugs can stay energised permanently, overheating them and draining the battery – then also check the single plug codes P0671 ff and P066x. CARB requires glow plug circuits to be monitored for correct current and voltage drop.
Possible causes
- Sense wire chafed against positive or bridged in the connector high
- Glow relay sticking or output stage shorted (supply stays on) medium
- Measuring circuit in the engine module medium
Symptoms
- Check engine light on
- Glow plugs possibly energised permanently (flat battery, plug damage)
- Glow plug light implausible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P037F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.