P0379
Timing Reference High Resolution Signal B No Pulses
Some diesel systems give the injection control a finely divided angle signal in addition to the normal reference signal – the high resolution signal – for precise injection timing and metering. P0379 means a second high resolution signal, B, delivers no pulses at all although the engine turns; it is checked in the same way as signal A (P0370 ff). No manufacturer with a separate signal B was found – GM's diesels with a high resolution signal (6.5-litre, Duramax LB7) only have signal A, and Ford and GM 2014–2019 do not use the codes. The description therefore follows the J2012 name, the analogy to signal A and CARB's monitoring requirement for crank angle sensors. Typically the engine loses power and runs roughly.
Possible causes
- Sensor faulty or dirty high
- Loose contact or interference in the signal wire medium
- Sensor disc or tone wheel damaged low
- Engine module low
Symptoms
- Check engine light on
- Loss of power (limp-home fuelling)
- Rough running, hard starting, smoke
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0379
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.