OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0374

Timing Reference High Resolution Signal A No Pulses

Some diesel systems give the injection control a finely divided angle signal in addition to the normal reference signal – the high resolution signal. By its J2012 name P0374 means signal A delivers no pulses at all although the engine turns. GM's 2004 Duramax LB7 uses the code differently, for a plausibility fault: the injector driver module evaluates the 57X crank signal and reports it as implausible over CAN; from 60 rpm, 100 of 120 samples of 31.6 ms set the code, in the first trip. GM's 6.5-litre diesel with the optical sensor in the injection pump reports all faults of its high resolution track under P0370. Without the fine signal the module falls back to coarser timing, so the engine loses power and may run roughly or start poorly.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / 74

Possible causes

  • Sensor (pump or crankshaft) faulty or dirty high
  • Loose contact or interference in the signal wire medium
  • Sensor disc or tone wheel damaged medium
  • Injector driver module or engine module low

Symptoms

  • Check engine light on
  • Loss of power (limp-home fuelling)
  • Rough running, hard starting, smoke

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0374

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 5 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication