P0364
DC/AC Converter Control Module Control Circuit Range/Performance
P0364 reports that the control circuit between the engine module and the control module of a DC/AC converter (inverter) behaves implausibly – the command or enable line is present but its signal does not fit what the engine module expects. The code is a late assignment in the P03xx block; the other DC/AC converter codes sit in the P2DAx range (P2DA8–P2DAB). Ford uses it on the 2021 F-150. On the 3.5 L PowerBoost hybrid, whose DC/AC converter module A feeds the Pro Power Onboard sockets, bulletin 21-2229 links P0364 in the PCM to a disabled Pro Power Onboard and a 'Pro Power Onboard Service Required' message; the cause was software parameters in the inverter and the PCM, fixed by reprogramming both. Bulletin 21-2087 lists P0364 among the codes that 3.5 L EcoBoost trucks built up to 2 March 2021 stored with the MIL on, cured by a PCM update alone. Without such a bulletin, check the enable and command wiring between PCM and inverter and the software levels of both modules.
Possible causes
- Control or enable line to the converter module disturbed (connector, wiring) medium
- Converter control module faulty internally medium
- Software of the modules involved low
Symptoms
- Warning lamp depending on the manufacturer
- Converter function restricted (for example power socket or hybrid drive)
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0364
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.