OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0363

Misfire Detected - Fueling Disabled

P0363 is a reaction code: the engine module has detected misfire severe enough to damage the catalyst – through its crankshaft-based misfire monitor – and has therefore shut off injection to the affected cylinder or cylinders. CARB allows exactly this: a vehicle that cuts fuel immediately on catalyst-damaging misfire may turn the check engine light on steadily instead of flashing it, and may switch fuel back on to re-check at most every 30 s. The code names no cylinder; that comes from the accompanying P0301 ff. It is documented by code only at FCA: two reprogramming bulletins for the 2017–2018 Alfa Romeo Giulia 2.0 turbo list P0363 alongside misfire and mixture codes. Ford reacts in the same way without its own code, VW uses a manufacturer code (P130A) for the hidden cylinder, and GM does not list P0363.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / 63

Possible causes

  • Ignition coil or spark plug of the affected cylinder faulty high
  • Injector sticking or leaking, or fuel pressure too low medium
  • Engine module software (misfire detection, cold-start mixture) medium
  • Mechanical cause: loss of compression, valve or carbon deposits, vacuum leak low

Symptoms

  • Check engine light on steadily instead of flashing
  • Clearly rough running, one cylinder without power
  • Loss of power
  • Jerking or stalling, especially when cold

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0363

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication