P0334
Knock/Combustion Vibration Sensor B Circuit Intermittent
The knock sensor is a piezoelectric structure-borne sound sensor bolted to the engine block; the module evaluates its signal per cylinder and retards ignition when it detects knock. Sensor B is the second sensor – bank 2 on V engines, but on some four-cylinders also bank 1. With a fault the module retards ignition across the board as protection – noticeable loss of power and higher consumption. P0334 reports brief dropouts of the sensor signal – loose contacts, a wire breaking with engine movement and heat, or a loose sensor. No manufacturer document with a threshold for this code was found; GM and Ford cover such faults with their circuit codes, so the description follows CARB's input monitoring requirement.
Possible causes
- Loose contact, spread pins or corrosion in the connector high
- Wire chafing only with engine movement or heat medium
- Sensor loose or wrongly torqued medium
- Sensor or engine module faulty low
Symptoms
- Check engine light on
- Loss of power, sluggish response from ignition retard
- Higher fuel consumption
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0334
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.