OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0331

Knock/Combustion Vibration Sensor B Circuit Range/Performance

The knock sensor is a piezoelectric structure-borne sound sensor bolted to the engine block; the module evaluates its signal per cylinder and retards ignition when it detects knock. Sensor B is the second sensor – bank 2 on V engines, but on some four-cylinders also bank 1. With a fault the module retards ignition across the board as protection – noticeable loss of power and higher consumption. P0331 means the circuit is electrically sound but the signal is implausible. GM sets it when the filtered background noise stays below a threshold – typically a loose sensor or one not bolted down properly – in the first trip; Saab's GM-based engines also when excessive knock persists on several cylinders or a whole bank for 8–10 s. Ford does not use this code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / 31

Possible causes

  • Sensor loose, wrongly torqued or mounted with sealant or on a dirty surface high
  • Engine software or calibration (bulletins for some models) medium
  • Genuine knock on a whole bank or mechanical noise medium
  • Sensor aged or damaged (low sensitivity) low

Symptoms

  • Check engine light on
  • Loss of power, sluggish response from ignition retard
  • Higher fuel consumption

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0331

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication