OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0323

Ignition/Distributor Engine Speed Input Circuit Intermittent

P0323 stands for a speed and reference signal at the ignition input – today the crankshaft position sensor – that drops out or is disturbed for moments and then recovers. None of the manufacturer documents available to us (GM 2014–2019, Ford 2012 and 2020–2023, Saab workshop information) uses P0323; the sporadic crank sensor check runs under P0339 at Ford and under P0336 at GM. Ford's logic shows what is evaluated: teeth missing or extra for a moment and the reference gap appearing at an unexpected position, after which the module briefly cuts fuel and spark and resynchronises. Typical causes are a loose contact, chafed wiring and electrical interference. The code itself is described only by its J2012 name and CARB's monitoring requirement for crank angle sensors.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number3 / 23

Possible causes

  • Loose contact or corrosion at the sensor connector high
  • Chafed wiring, break under vibration medium
  • Sensor dropping out when hot medium
  • Interference from neighbouring wires low

Symptoms

  • Brief stumbling or stalling, then normal again
  • Sporadic misfire
  • Tachometer flickers
  • Check engine light on

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0323

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication