P0319
Rough Road Sensor B Signal Circuit
Misfire detection works from crankshaft speed fluctuations, which rough roads also cause. CARB therefore allows misfire detection to pause on rough roads; many engines take a rough-road signal from the wheel speeds of the ABS module, a Ford patent describes such a detector. P0319 is like P0318, but for a second rough-road signal source B – depending on the manufacturer, for example an acceleration sensor or transmission output speed. The signal is missing or invalid, so misfire detection runs without its rough-road filter. No manufacturer using P0319 was found; following GM's handling of P0318, the warning light often stays off.
Possible causes
- Signal source B or its wiring faulty high
- Communication fault to the supplying module (ABS, transmission) medium
- Configuration or software low
- Engine module faulty low
Symptoms
- Warning light (manufacturer-dependent, often none)
- Possibly ABS or transmission codes
- Driving unaffected
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0319
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.