P0317
Rough Road Hardware Not Present
Misfire detection works from crankshaft speed fluctuations, which rough roads also cause. CARB therefore allows misfire detection to pause on rough roads; many engines take a rough-road signal from the wheel speeds of the ABS module, a Ford patent describes such a detector. P0317 means the engine module is calibrated for an external rough-road signal but does not find the hardware: the supplying module does not respond on the data bus, or the configuration does not match the equipment – for example after replacing the engine or ABS module. Without the signal misfire detection cannot separate road bumps from misfires. No manufacturer document using P0317 was found; the description follows CARB and GM's rough-road sources in its misfire monitor.
Possible causes
- Module configuration does not match the equipment (after engine or ABS module replacement) high
- ABS/ESP module not responding (supply, CAN line) medium
- Separate rough-road sensor missing or unplugged, where fitted low
- Engine module faulty low
Symptoms
- Warning light (manufacturer-dependent)
- Misfire readiness not set
- Possibly false misfire codes on rough roads
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0317
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.