P02FC
Cold Start Fuel Injection Control Circuit Low
Cold start fuel injection is an extra injection system for cold starts – for example on flex-fuel engines running on high ethanol blends, where a Hyundai patent describes a small auxiliary tank, a cold-start injector and a heater. CARB lists such heated fuel preparation systems among the monitored output components. P02FC means the control circuit reads low – typically the control wire shorted to ground or a shorted turn in the cold-start injector. Depending on the circuit the valve then does not work, or it stays open and over-fuels the engine, causing fuel smell and hot-start problems. No manufacturer document using this code was found; unlike the older P0213/P0214, these codes separate the fault types.
Possible causes
- Control wire chafed through, shorted to ground high
- Shorted turn in the cold-start injector or valve medium
- Water or corrosion in the connector medium
- Driver stage in the engine module low
Symptoms
- Check engine light on
- Hard cold start, or over-fuelling with fuel smell if the valve stays open
- Rough running when cold
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P02FC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.