P02F7
Cylinder 10 Injector Circuit Range/Performance
P02F7 reports an electrically implausible response of the cylinder 10 injector – not an open or short circuit (those are P0210, P0288 and P0289), but a current or voltage pattern outside the expected range. Cylinder 10 exists only on engines with ten or more cylinders; GM and Ford documents stop at cylinder 8, so the description follows CARB and the documented checks for cylinders 1–8 (current fall time, voltage feedback, regulator at its limit). The injector may be shut off, causing misfire.
Possible causes
- Injector electrically aged (piezo capacitance, coil resistance) high
- Contact resistance in the injector 10 connector or wiring medium
- Injector mechanically sticking (valve lift) medium
- Injector driver stage in the engine module low
Symptoms
- Check engine light on
- Rough running, misfire on cylinder 10
- Loss of power, smoke (diesel)
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P02F7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.