OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P02EE

Cylinder 1 Injector Circuit Range/Performance

P02EE reports an electrically implausible response of the cylinder 1 injector – not an open or short circuit (those are P0201, P0261, P0262), but a current or voltage pattern outside the expected range. GM's 8-cylinder diesel checks the time the current takes to fall from hold to zero (outside 20–50 µs in 10 of 20 samples, two trips); GM's petrol direct injection evaluates the voltage feedback of the opening and closing; Ford's diesels flag the injector's voltage or charge regulator at its limit (90 s), Ford's petrol direct injection its controlled-valve-operation adaptation at its limit. The injector may be shut off, causing misfire.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / EE

Possible causes

  • Injector electrically aged (piezo capacitance, coil resistance) high
  • Contact resistance in the injector 1 connector or wiring medium
  • Injector mechanically sticking (valve lift) medium
  • Injector driver stage in the engine module low

Symptoms

  • Check engine light on
  • Rough running, misfire on cylinder 1
  • Loss of power, smoke (diesel)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P02EE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication