P02ED
Diesel Intake Air Flow A Control System - Low Air Flow Detected
Ford's 6.7 and 3.0 diesels control the air mass through the EGR valve and the intake throttle. P02ED means the measured air mass stays below target with the control at its limit – too much EGR, a throttle stuck closed or a clogged intake – for 10 s (6.7) or 5 s (3.0). Typical causes are an EGR valve stuck open, a clogged air filter, a sooted throttle or a dirty mass airflow sensor. The engine lacks air: loss of power, smoke and high soot load. Other manufacturers using this code were not found.
Possible causes
- EGR valve stuck open high
- Air filter or intake clogged medium
- Intake throttle stuck closed or coked medium
- Mass airflow sensor reading too low (dirty) medium
- Underboost or turbo fault low
Symptoms
- Check engine light on
- Lack of power
- Smoke, high soot load in the filter
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P02ED
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.