P02EC
Diesel Intake Air Flow A Control System - High Air Flow Detected
Ford's 6.7 and 3.0 diesels control the air mass through the EGR valve and the intake throttle. P02EC means the measured air mass stays above target with the control at its limit – too little EGR, or the throttle cannot restrict enough – for 10 s (6.7) or 5 s (3.0). Typical causes are a stuck-closed EGR valve or clogged EGR cooler, a throttle stuck open or a mass airflow sensor reading too high. NOx rises; driving is usually unaffected. Other manufacturers using this code were not found.
Possible causes
- EGR valve stuck closed or EGR cooler clogged high
- Intake throttle stuck open (P02E4) medium
- Mass airflow sensor reading too high medium
- Boost too high low
Symptoms
- Check engine light on
- Higher NOx
- Often no change in driving
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P02EC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.