OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P02E5

Diesel Intake Air Flow A Control Stuck Closed

The diesel intake air flow valve A is the throttle flap ahead of the intake manifold of a diesel engine: it creates the vacuum needed for high EGR rates, lowers airflow to heat the particulate filter and catalyst during regeneration and closes at switch-off against run-on shaking. A spring holds it open when unpowered; an electric motor positions it, with a position sensor reporting back. P02E5 means the valve stays more closed than commanded or does not return to its open rest position when unpowered – more critical than stuck open, because the engine lacks air. GM sets it at over 8 % more closed than commanded with more than 80 % duty for about 4 s, or after switch-off when the unpowered valve stays below 90 % open, with the warning light in the first trip. Result: loss of power, black smoke, in extreme cases stalling.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / E5

Possible causes

  • Coking or oil carbon holding the valve closed high
  • Return spring broken medium
  • Gear blocked medium
  • Icing low

Symptoms

  • Check engine light on at once
  • Severe loss of power, limp mode
  • Black smoke, poor starting or stalling

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P02E5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication