OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P02E4

Diesel Intake Air Flow A Control Stuck Open

The diesel intake air flow valve A is the throttle flap ahead of the intake manifold of a diesel engine: it creates the vacuum needed for high EGR rates, lowers airflow to heat the particulate filter and catalyst during regeneration and closes at switch-off against run-on shaking. A spring holds it open when unpowered; an electric motor positions it, with a position sensor reporting back. P02E4 means the valve stays more open than commanded, so the EGR rate and regeneration heating cannot be achieved. GM sets it when the valve is over 8 % more open than commanded although the motor pushes at more than 80 % duty, for about 4 s, with the warning light in the first trip; Ford's diesels at more than 15 % deviation for 25 s, also during the cold-start strategy. Driving is barely affected, but NOx and soot rise.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / E4

Possible causes

  • Coking or oil carbon preventing closing high
  • Return spring or gear faulty, flap loose on the shaft medium
  • Motor too weak (wear) medium
  • Foreign object or ice low

Symptoms

  • Check engine light on
  • Regeneration aborts, soot load rises
  • Shaking at switch-off, little loss of power

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P02E4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication