P02E0
Diesel Intake Air Flow A Control Circuit/Open
The diesel intake air flow valve A is the throttle flap ahead of the intake manifold of a diesel engine: it creates the vacuum needed for high EGR rates, lowers airflow to heat the particulate filter and catalyst during regeneration and closes at switch-off against run-on shaking. A spring holds it open when unpowered; an electric motor positions it, with a position sensor reporting back. P02E0 means the motor circuit is open – cable, connector or motor winding. GM diesels detect more than 200 kΩ with the driver off, after about 1.5 s (6.6 litre LML: 7 s), two trips. On a fault the valve is switched off and the spring opens it: driving is usually little affected, but EGR control is restricted and filter regeneration may be blocked.
Possible causes
- Connector at the throttle corroded or loose high
- Broken motor wire medium
- Motor winding of the valve open medium
- Driver stage in the engine module low
Symptoms
- Check engine light on
- Often no noticeable change
- Filter regeneration does not run, soot load rises
- Shaking at switch-off
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P02E0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.