P02C9
Cylinder 12 - Injector Leaking
These codes belong to an individual-cylinder fuel correction: a diesel's cylinder balance control measures each cylinder's crankshaft acceleration and adjusts its injection quantity; on petrol engines a cylinder-selective mixture control does the same. CARB requires the system to report when such a correction has used up its range or one cylinder causes an imbalance. P02C9 means the module detects fuel entering cylinder 12 outside the injection pulse – the injector is leaking or dripping. A BMW patent identifies such a leak by the fact that it persists with the injector switched off. A leaking diesel injector can dilute the oil or damage the piston, so act promptly. Cylinder 12 only exists on engines with twelve or more cylinders. GM and Ford use other codes for this (P0263 ff, P219A ff); no manufacturer document describing this code with thresholds was found, so the description follows CARB and published patents.
Possible causes
- Nozzle seat or needle of the cylinder 12 injector leaking high
- Deposits keeping the needle from closing fully medium
- Rail pressure too high low
- Wrong or wrongly coded injector low
Symptoms
- Check engine light on
- Rough idle, vibration
- Smoke, fuel smell, knocking
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P02C9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.