OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P02C6

Cylinder 12 - Fuel Trim at Max Limit

These codes belong to an individual-cylinder fuel correction: a diesel's cylinder balance control measures each cylinder's crankshaft acceleration and adjusts its injection quantity; on petrol engines a cylinder-selective mixture control does the same. CARB requires the system to report when such a correction has used up its range or one cylinder causes an imbalance. P02C6 means the correction for cylinder 12 is at its upper limit: the module keeps giving this cylinder more fuel and still cannot even it out – a sign that the cylinder receives too little fuel or builds too little pressure. Cylinder 12 only exists on engines with twelve or more cylinders. GM and Ford use other codes for this (P0263 ff, P219A ff); no manufacturer document describing this code with thresholds was found, so the description follows CARB and published patents.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / C6

Possible causes

  • Injector of cylinder 12 coked or partly clogged high
  • Compression loss in this cylinder (valve, rings, leak at injector or glow plug) medium
  • Injector circuit high-resistance or connector medium
  • Petrol: false air at this cylinder's intake (manifold gasket) medium
  • Injector correction code missing or wrong after replacement low

Symptoms

  • Check engine light on
  • Rough idle, vibration
  • Lack of power, possibly misfire

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P02C6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication