P02BC
Cylinder 9 - Injector Restricted
These codes belong to an individual-cylinder fuel correction: a diesel's cylinder balance control measures each cylinder's crankshaft acceleration and adjusts its injection quantity; on petrol engines a cylinder-selective mixture control does the same. CARB requires the system to report when such a correction has used up its range or one cylinder causes an imbalance. P02BC means the module attributes the deviation of cylinder 9 to an injector delivering too little – deposits or a sticking nozzle needle. Cylinder 9 only exists on engines with ten or more cylinders. GM and Ford use other codes for this (P0263 ff, P219A ff); no manufacturer document describing this code with thresholds was found, so the description follows CARB and published patents.
Possible causes
- Deposits or coking at the nozzle of cylinder 9 high
- Nozzle needle sticking medium
- Contaminated fuel or water medium
- Injector circuit high-resistance medium
- Compression loss mimicking low output low
Symptoms
- Check engine light on
- Rough idle, vibration
- Lack of power, higher consumption or smoke
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P02BC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.