P02BB
Cylinder 9 - Fuel Trim at Min Limit
These codes belong to an individual-cylinder fuel correction: a diesel's cylinder balance control measures each cylinder's crankshaft acceleration and adjusts its injection quantity; on petrol engines a cylinder-selective mixture control does the same. CARB requires the system to report when such a correction has used up its range or one cylinder causes an imbalance. P02BB means the correction for cylinder 9 is at its lower limit: the module keeps taking fuel away from this cylinder and still cannot even it out – a sign that it receives too much fuel, for example from a dripping injector. Cylinder 9 only exists on engines with ten or more cylinders. GM and Ford use other codes for this (P0263 ff, P219A ff); no manufacturer document describing this code with thresholds was found, so the description follows CARB and published patents.
Possible causes
- Injector of cylinder 9 dripping or leaking high
- Injector with excessive flow (worn seat or needle) medium
- Wrong injector correction code after replacement low
- Injector circuit short (extended activation) low
Symptoms
- Check engine light on
- Rough idle, vibration
- Higher consumption, smoke or fuel smell
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P02BB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.