P02B5
Cylinder 7 - Injector Leaking
These codes belong to an individual-cylinder fuel correction: a diesel's cylinder balance control measures each cylinder's crankshaft acceleration and adjusts its injection quantity; on petrol engines a cylinder-selective mixture control does the same. CARB requires the system to report when such a correction has used up its range or one cylinder causes an imbalance. P02B5 means the module detects fuel entering cylinder 7 outside the injection pulse – the injector is leaking or dripping. A BMW patent identifies such a leak by the fact that it persists with the injector switched off. A leaking diesel injector can dilute the oil or damage the piston, so act promptly. GM and Ford use other codes for this (P0263 ff, P219A ff); no manufacturer document describing this code with thresholds was found, so the description follows CARB and published patents.
Possible causes
- Nozzle seat or needle of the cylinder 7 injector leaking high
- Deposits keeping the needle from closing fully medium
- Rail pressure too high low
- Wrong or wrongly coded injector low
Symptoms
- Check engine light on
- Rough idle, vibration
- Smoke, fuel smell, knocking
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P02B5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.