OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P02AB

Cylinder 5 - Fuel Trim at Min Limit

These codes belong to an individual-cylinder fuel correction: a diesel's cylinder balance control measures each cylinder's crankshaft acceleration and adjusts its injection quantity; on petrol engines a cylinder-selective mixture control does the same. CARB requires the system to report when such a correction has used up its range or one cylinder causes an imbalance. P02AB means the correction for cylinder 5 is at its lower limit: the module keeps taking fuel away from this cylinder and still cannot even it out – a sign that it receives too much fuel, for example from a dripping injector. GM and Ford use other codes for this (P0263 ff, P219A ff); no manufacturer document describing this code with thresholds was found, so the description follows CARB and published patents.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / AB

Possible causes

  • Injector of cylinder 5 dripping or leaking high
  • Injector with excessive flow (worn seat or needle) medium
  • Wrong injector correction code after replacement low
  • Injector circuit short (extended activation) low

Symptoms

  • Check engine light on
  • Rough idle, vibration
  • Higher consumption, smoke or fuel smell

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P02AB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication