P029E
Cylinder 2 - Fuel Trim at Max Limit
These codes belong to an individual-cylinder fuel correction: a diesel's cylinder balance control measures each cylinder's crankshaft acceleration and adjusts its injection quantity; on petrol engines a cylinder-selective mixture control does the same. CARB requires the system to report when such a correction has used up its range or one cylinder causes an imbalance. P029E means the correction for cylinder 2 is at its upper limit: the module keeps giving this cylinder more fuel and still cannot even it out – a sign that the cylinder receives too little fuel or builds too little pressure. GM and Ford use other codes for this (P0263 ff, P219A ff); no manufacturer document describing this code with thresholds was found, so the description follows CARB and published patents.
Possible causes
- Injector of cylinder 2 coked or partly clogged high
- Compression loss in this cylinder (valve, rings, leak at injector or glow plug) medium
- Injector circuit high-resistance or connector medium
- Petrol: false air at this cylinder's intake (manifold gasket) medium
- Injector correction code missing or wrong after replacement low
Symptoms
- Check engine light on
- Rough idle, vibration
- Lack of power, possibly misfire
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P029E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.