OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0299

Turbocharger/Supercharger A Underboost Condition

P0299 means actual boost stays below target for a period although the control already demands more. Thresholds: GM petrol 30–55 kPa below target with the warning light in the first trip; GM diesels 10–50 kPa, two trips; Ford EcoBoost more than 4 psi (about 28 kPa) for 5 s with the wastegate already commanded fully closed; Ford diesels 30–40 kPa for 10–15 s, with a further underboost code P2263. Typical causes from manufacturer bulletins: a charge air leak, a wastegate that lost its preload or whose rod came off, a leaking bypass valve, sticking turbo vanes on diesels, and ice in the charge air cooler in winter. A faulty boost sensor can also fake underboost. Many engines then limit power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 99

Possible causes

  • Leak in the charge air path (hose off or torn, cooler leaking, clamps) high
  • Wastegate faulty (rod off, preload lost, vacuum or solenoid, diaphragm) high
  • Turbo vanes sticking or turbo worn (diesel) medium
  • Bypass valve leaking (torn diaphragm) or its control medium
  • Ice in the charge air cooler, boost sensor or connector, or software low

Symptoms

  • Loss of power, sluggish acceleration
  • Limp mode, power limited
  • Check engine light on
  • Whistling or hissing from the charge air path under load

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0299

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication