OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0298

Engine Oil Over Temperature

P0298 is a protection code: engine oil temperature – from its own sensor, often combined with the oil level sensor, or modelled – has exceeded the protection limit. Saab's 3.0 diesel limits injection quantity when the oil stays at 135 °C or more for over 10 s, until it cools down; a heavy-duty bus engine warns in two stages and then derates. Ford stores the code without the warning light, in line with CARB's exemption for overheat protection. Usual causes are high load in heat, cooling problems, a clogged oil cooler or stuck oil thermostat, and occasionally a sensor reading too high.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 98

Possible causes

  • High load in heat (trailer, mountain pass, stop-and-go) high
  • Cooling or fan problem (clogged radiator, fan, thermostat, low coolant) medium
  • Oil cooler clogged or oil thermostat stuck medium
  • Oil temperature or level sensor reading too high medium
  • Low oil level or wrong oil low

Symptoms

  • Reduced power, quantity limited
  • Oil temperature warning
  • Usually no check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0298

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication